Optek Films PPF is the best PPF on the market at the best price. We do not limit installers by geography, or demand exclusivity for our product lines. Our film is for seasoned installers who do not need guidance or training, but rather just great quality products, and our pricing reflects that

Optek Films PPF can be purchased online at OptekFilms.com after becoming a Pro Member

Optek Films PPF is sold in 60” X 50’ rolls and by the foot with a three-foot minimum.

Yes, which means that the material will create a water-resistant surface for easy cleaning.

Yes, Optek Films PPF is self-healing which means that light scratches and swirls will disappear with the usage of a heat gun or exposure to the sun.

Optek Films PPF currently comes in a Gloss Finish, and a Matte Finish

Optek Films PPF can be universally used with all cut software on the market, and does not require a subscription or cost-per-cut like many other brands.

Yes, Optek Films PPF does have a cap sheet.

Both lines of Optek Films PPF have lifetime warranties. Each purchase will come with an Optek Films PPF warranty card that will need to be filled out/registered online at optekfilms.com. Please note: That warranty is valid for professional installations only. This warranty is not valid for do-it-yourself (DIY) applications, or non-professionals. Warranty is non-transferable and is limited to product defects only. Please see our warranty page for more information.

For installers: Both lines of Optek Film are warrantied from product defects, Optek Films will cover defects on their Automotive PPF (the “Product(s)”) such as: yellowing, peeling, cracking, and delamination of the film. This Limited Warranty only applies to the Optek Film’s Products which are professionally installed in the manner recommended by the Optek Films.

Optek Films does not offer any warranty coverage for any errors that have occurred by the installer during or after the installation process.

Optek Films PPF Chip Defense is 8 Mil thick.

Optek Films PPF cannot be returned with the exception of a defective product, in which case please email info@optekfilms.com for more support.

We recommend using a “slip solution” made up of baby shampoo and distilled water and a “rinse solution” made up of distilled water.

Optek Films PPF Chip Defense is 8 Mil thick.

The vehicle’s surface should be thoroughly cleaned and free of any dirt, grease, or wax. It is often recommended to clay bar and polish the paint to ensure a smooth surface.

The installation time can vary depending on the coverage area. Generally, it can take between a few hours to a full day for complete coverage.

Common tools include a squeegee, spray bottle with soapy water, heat gun, and a sharp cutting blade. Professional installers may use specialized tools for precise application.

Yes, PPF is designed to be flexible and can be installed on complex curves and edges of the vehicle. Skilled installers use special techniques to ensure a seamless fit.

Optek Films is only available for professional installation, and is recommended for the best results. Professionals have the experience and tools to apply the film without bubbles or imperfections.

If bubbles form under the PPF, use a squeegee to gently push the bubbles towards the edges of the film. If the bubbles are persistent or caused by dust particles, the affected area may need to be lifted, cleaned, and reapplied. Additionally, most bubbles should resolve themselves one week after installation as moisture evaporates from underneath the surface of the PPF.

If the PPF is not adhering properly, ensure the surface is thoroughly cleaned and free of any contaminants. Reapply the slip solution (soapy water) to the adhesive side of the film and the vehicle surface, then reposition and squeegee out the solution. If adhesion issues persist, consider using a tack solution to increase adhesion.